The iTaste Hunter is powered by the ultra-fast Aethon chipset with a ClearWave signal smooth technology and a Variable Temperature Cooling System offering up to 75W of real power. Power output includes Nickle200, Titanium, and Stainless Steel 316 in TC mode. This rugged-looking device is designed for the outdoors and is specifically perfect for vapers on the go. The iTaste Hunter uses a replaceable high amp 18650 battery focused for safety and durability. This Innokin mod is designed to be a high-quality compact device for all-day vapes. But like most other vaporizers in the market, iTaste Hunter has its own fair share of hits and misses.
Table of Contents
How Does Innokin iTaste Hunter Perform?
If you’re an experienced vaper, you’d see the iTaste Hunter as a kit for beginners, but its vape production quality is good enough for beginners and experienced vapers alike. This device does a great job delivering rich and flavorful clouds, but you need an external charger to use it. However, thanks to its vertical mount and perfect temperature control coils, the kit renders perfect flavors and
If you need a back-up when attending outdoor activities and need a sturdy device sustain you, the iTaste Hunter might just be a perfect mod for you. Besides, its reasonable 75W power will keep most vapers going. What’s more, iTaste Hunter’s has an ultra-fast Aethon chipset that prevents dry hits. It then offers homogenous coil heating, which is a perfect feature for safety.
The iTaste Hunter Features and Accessories
- Ultra-Low Standby Power Consumption
- Dry Hit Detection & Prevention
- Ultra-low External Heat Generation
- Balanced Even Coil Heat-Up
- Direct Current –Steady Power Output
- Precision Temperature Control
- Operating Wattage Range: 6.0 – 75W (0.5watt increments)
- Operating Temperature Range— (150-315 °C 5°C increments 300-600 °F 5°F increments)
- Short Circuit Protection
- 15 Second Vaping Cut Off
- Unique Circular Display
- Minimum Resistance Of 0.1ohm
- AETHON Chip
- Screw Off Battery Cap with Venting Holes
What’s iTaste Hunter’s Box Content?
The Innokin iTaste Hunter Kit is packed in a nondescript cardboard box with almost enough gear to get you going—you just need to supply a suitable 18650 battery and e-liquid. Inside the box, you’ll find:
- A detailed user manual
- Innokin vape band
- 2x 0.5ohm iSub SS316L coils
- Spare O-rings for iSup Vortex
- Innokin iSub V Vortex sub ohm tank
- Innokin iTaste Hunter
Innokin iTaste Hunter Features Design and First-Impression
This vaping kit is solid and well-built and although feels quite bulky comparing it to other models in the Innokin family such as the dual-18650. It has a very rugged appearance and measures about 89 x 51 x 25mm. Its outer shell is made of hard plastic and metal making the grip comfortable, although rubber would have made the appearance and feel even better. Its LED display is circular and positioned on the face of the kit—on the main side, you’ll find the fire and adjustment buttons.
The battery compartment is also visible at the bottom of the mod, and it has a very cool knurling for easy accessibility. The kit is also designed for durability and safety, resembling a portable walkie-talkie or radio. The kit is available in six different colors finishes—with green, blue, black, white, desert, and red available. If you like devices that are authentically rugged, then you’re definitely going to find Innokin iTaste Hunter appealing.
Using Innokin iTaste Hunter Kit
Normally, all Innokin devices are easy to use—they are designed to be as user-friendly as possible. Even if you are a new user, you shouldn’t find it tasking to set up the device and get started. However, before you get started, you’ll need to ensure that the iSub V Vortex tank is ready to use.
You’ll require to simply unscrew the top cap of the tank, fill it with your e-liquid, crew back the lid, and allow the liquid to sit for about 5 minutes to allow it to soak into the coil head completely. Once this is done, insert a 18650 battery by opening the battery cap and sliding the batt in (positive side up), and then screw back the cap. You should be able to use the device now. Three clicks will turn the mod on and off. The user manual should guide you on the best way to fill in the e-liquid and how to use the device properly.
What is iSub Vortex?
The Innokin iSub V Vortex sub ohm 3ml tank is one of the components of the general iTaste Hunter kit. The iSub Vortex is also designed to allow easy change of coils by sliding the old one out and replacing it with a new one, easily and swiftly. The tank is one of the leading Innokin tanks and well-matched with other existing Innokin coil heads.
Innokin Hunter iTaste Specifications
|Construction Material:||Aluminium Zinc Alloy|
|Battery Capacity:||Single 18650|
|Wattage Range:||6W - 75W|
|Size:||72mm * 50mm * 25mm|
|Tempeature Range:||300°F to 600°F / 150°C to 315°C|
|Colors:||Black, White, Red, Blue|
- Robustness thanks to its rugged design
- Simplified and intuitive settings
- Threaded 510 on spring
- Good finish for threads (510 and battery trap)
- Reasonable weight and size
- Smart battery trap
- User manual of valuable help
- AETHON Chipset, performant and ultra-fast
- Interchangeable, strong battery 18650
- Good value for money
- No charger and battery in the kit (bought separately)
- Non-adjustable brightness
- No USB plug for charging
Our Final Verdict on the Innokin iTaste Hunter Kit
If you aren’t bothered about style and would go for a mod that offers top-notch stable performance, then the iTaste Hunter is a top vaporizer to consider. This kit provides remarkable vape clouds, and you can bash around with it all you want. Its ease of use and high performance makes it an excellent kit for experienced and new users alike. Although this device offers value for money, it’s a downer it doesn’t come packed with its own battery.