Best E-Liquid Vape Pens Guide of 2022

The VooPoo Doric 60 is a tube mod with an integrated 2500mAh battery and a 4.5ml e-liquid tank. The Doric 60 has a high-power output of 60W and comes with the GENE chip that allows for dual-inhalation, auto-draw, or button modes. The vape has a durable, zinc alloy exterior with three LEDs showing its current battery level. The Doric 60 also comes with Type-C fast charging, so the device does not take long to recharge.

Reasons to Get This:

• You want a pod vape that hits hard
• You want a backup device for your other vapes
• You want an all-day device you can carry with you

Kit Contents

• 1 x Doric 60 Device
• 1 x PnP-Pod (4.5ml)
• 1 x PnP-VM1, 0.3ohm
• 1 x PnP-VM5, 0.2ohm
• 1 x Type-C Cable
• 1 x User Manual

The FreeMax Marvos T Kit is a pen-style device with an internal 3000mAh battery that can power the device up to 80W. The Marvos features the FM Chip 2.0 and uses a single button to control its various functions. There is a 4.5ml e-juice pod that accompanies the device, which has a bottom-fill method stopped by a silicone plug. The pod also features a two-sided airflow control switch so you can adjust the airflow.

Reasons to Get This:

• You want a solid tube device
• You want something with adjustable airflow
• You want something with removable coils

Kit Contents

• 1 x Freemax MARVOS T 80W Battery
• 1 x 4.5mL Freemax MARVOS DTL Pod
• 1 x 0.15ohm Freemax MS Mesh Coil
• 1 x 0.25ohm Freemax MS Mesh Coil
• 1 x Type-C USB Charger
• 1 x Warranty Card
• 1 x User Manual

The Vaporesso GTX GO 80 is a pen-style vape that uses an internal 3000mAh battery that can reach a high-power output of 80W. There is a single button on the device’s zinc-alloy exterior, but the device does come with Type-C charging, so it charges faster than average. The GTX also has an e-liquid tank that can carry up to 5ml of liquid and uses a 0.6ohm mesh coil. The device also has an airflow adjustment slide on the pod for users to adjust the airflow.

Reasons To Get This:

• You want a long-lasting device
• You want something with airflow adjustment
• You want a device that is well-made and durable

Kit Contents

• 1 x GTX GO 80 Battery
• 1 x GTX POD 26 (5ml)
• 1 x GTX 0.2ohm MESH COIL
• 1 x Type-C USB Cable
• 1 x User Manual
• 1 x Warranty Card

The SMOK Nord PRO is a pod vape that delivers a 25W maximum power output thanks to its internal 2500mAh battery. The Nord PRO is a follow-up to all the other Nord devices, but this one comes with a new chipset and offers both draw and button-style inhalation. The device also has airflow inlets to give users more control over the draw resistance. In addition, users can install the 3.3ml pod on the device, which takes two types of Mesh coil made specifically for the Nord.

Reasons to Get This:

• You are a fan of the other Nord devices
• You enjoy both MTL and DL vaping
• You want something lightweight and portable

Kit Contents

• 1 x SMOK nord PRO Device (1100mAh)
• 1 x SMOK nord PRO Empty Pod (3.3ml)
• 1 x SMOK nord PRO-Meshed 0.60) DL Coil (Preinstalled) (Best for Freebase Nic E-Liquid)
• 1 x SMOK nord PRO-Meshed 0.90 MTL Coil (Best for Nic Salt E-liquid)
• 1 x Type-C Cable
• 1 x User Manual

The Innokin Endura T18-X is a pen-style vape with an internal 1000mAh battery that is 810-threaded so that it can accommodate the T-18X tank. The Endura T18 is a single-button device with a slim build and a zinc-alloy exterior. The tank section features a series of windows made of Pyrex glass so you can check your e-juice levels. The tank can hold up to 2.5ml of e-liquid and uses a 1.5ohm coil.

Reasons to Get This:

• You are a fan of the Innokin line
• You want a starter device or a new vaper
• You want something lightweight and portable

Kit Contents

• 1 x Innokin Endura T18-X Battery
• 1 x Innokin Endura T18-X Tank
• 2 x 1.5ohm Prism T18 Coils
• 1 x Spare Drip Tip
• 1 x O Ring Set
• 1 x Type-C USB Cable

The GeekVape Wenax H1 is a pod device with an internal 1000mAh battery that can output at three different voltage levels. The Wenax has an all zinc-alloy chassis rated IP67, so it is waterproof, dust-proof, and shock resistant, typical of all GeekVape devices. The Wenax uses a 2.5ml pod compatible with MTL and DL coils. There is a 0.7ohm coil pre-installed in the pod, but it can also be swapped out for a 1.4ohm coil.

Reasons to Get This:

• You want a pod device made by GeekVape
• You want a device that has MTL and DL vaping capabilities
• You want a device that is waterproof and shock resistant

Kit Contents

• 1 x Geekvape Wenax H1 Device
• 2 x Geekvape Wenax H1 Cartridge (0.7ohm, 16-19W/1.4 ohm, 8-10W)

The Uwell Whirl T1 is a pod device that features a plastic and aluminum alloy build and can reach a high-power output of 16W. The unit has an internal 1300mAh battery and has three distinct power outputs, running from 14W to 16W. The device also features an internal 3ml e-liquid pod that takes several different types but comes with a 0.75ohm coil pre-installed. The unit also has a small LED display that shows the current power and battery level.

Reasons to Get This:

• You want a new type of pod device
• You want something easy-to-use
• You want a device that supports MTL vaping

Kit Contents

• 1x Uwell Whirl T1 Pod Mod
• 1x UN2 Meshed-H 0.75ohm Whirl T1 Pod
• 1x User Manual

The Freemax Maxpod 3 is a pod device with an internal 480mAh battery and uses draw-activation. The Maxpod 3 has a single LED on its front to indicate the current battery level whenever you take a vape. In addition, the device has a shiny, plastic exterior that makes it portable and lightweight so that you can take it anywhere with you.

Reasons to Get This:

• You want a starter pod device
• You want something easy-to-use
• You want something that is made for MTL vaping

Kit Contents

• 1 x Maxpod 3 15W Battery
• 1 x MD Mesh Pod 0.8ohm
• 1 x User Manual
• 1 x Desiccant