Augvape: High-Performance Mods and Customizable Tanks

The Augvape Zoom is constructed from a polymer whose surface is decorated with work made by street artists from all around the world. It is powered by a 1,000 mAh LiPo battery that can be charged in 30 minutes and lasts for five to six hours. The mod uses Zoom pods that use 0.6-ohm mesh coils and hold 3.2 ml of e-juice. It has an LED screen, a large firing button, and it fires up quickly. The Zoom can vape freebase and salt nicotine.

The Augvape S2 Squonk Mod is the product of collaboration between Augvape and Mass Mods. It is a bottom-feeding vape that has an ergonomic design, a prominently placed firing button, and a large 8.5 ml squonk bottle. The squonk bottle is easy to put into the device, and a single 18650 battery powers the mod. The mod uses the MOSFET chip to regulate voltage, and it fires in accordance with the battery life to keep the device running as long as possible. The box mod has a water-resistant coating to protect it from water and moisture.

The Augvape Slim Pod Device is explicitly designed for salt nicotine users, and it is disposable. When finished, throw it in the garbage and forget about it. This disposable pod can last 400 to 450 puffs before it is depleted. It contains 1.5 ml of salt nic e-juice made by CRFT Labs with a concentration of 50 mg. The package comes with four disposable mods.

The Augvape Lyfe Pod System in concert with Flawless. The result was an all in one system that is draw activated, generates 7.6 watts, and has a voltage range of 3.3 to 4.2 volts. The device is powered by a 300 mAh battery that lasts one day, and the pod can hold 2 ml of juice with the resistance of 2.0 ohm. The pods are bottom fed, and the liquid is prevented from leaking out by a silicone stopper.

The Augvape VX200 Box Mod Kit is a lightweight device that has a 1.3-inch OLED screen with 240 X 240 resolution and a hand-friendly ergonomic design. The display of the kit shows the status of its output modes, of which it has several. Variable wattage mode generates an output of 5 to 200 watts, voltage mode has a range of 0.5 to 7.2 volts, and in temperature control mode it vapes anywhere between 200 and 600 degrees Fahrenheit. Dual 18650 batteries power Augvape mod.

The Augvape Templar RDA has a 24 karat gold deck and base, and it is 24 mm in diameter with a juice well that is 4 mm deep. Its two-post build uses Phillips head screws. The tank has two airflow slots, 1 mm X 3 mm and 2 mm X 1 mm. The Augvape Templar uses an 810 fitment and a Delrin drip tip. It also comes with a frosted top cap. The tank comes with a lot of options, and it is made from quality materials.

Augvape Intake RTA is top-filled and has two large fill ports that are easy to access. The tank holds 4.2 ml of e-liquid, and with the bubble tank extension, it can hold an additional 2.5 ml. It has a build deck with a two-post build that can be removed from the base. Plus, it has two 3 mm terminals, PEEK insulation, and slots in the corners for wicking. The tank has adjustable air slots that are 10 mm X 3 mm. It sports an 8 mm wide Delrin drip tip and a 510 connection.

The Augvape Occula RDA tank was made together with Twisted Mess. The sum of their cooperation was a rebuildable bottom-fed atomizer. It has a build deck with posts measuring a 6 mm X 2.5 mm, and they can hold flat and round coils that are held in place with Flathead or Phillips head screws. The build deck is inside of a 5 mm deep juice reservoir. The wide bore drip tip is 10 mm and has a wide design for better airflow, which supplements the adjustable air control ring. There is a 510 pin that can be replaced with a bottom feed pin to enable squonking.

The Augvape Merlin Nano is an 18 mm rebuildable atomizer that holds 2 ml of e-juice. The package includes a 3.5 ml acrylic tank. It has a build deck with one terminal with airflow coming in from its base, which allows for deep mouth-to-lung hits. The airflow can be adjusted using the interchangeable airflow inserts measuring 7 mm X 4 mm and 1 mm X 1mm. This tank can work with most vape mods thanks to the 18 mm diameter at its base.

The is another device from Augvape that was the result of cooperation between themselves and a second party. In this case, their partner was VapnFagn, and the result was positive. This is a good tank with bottom and top airflow, good flavor, and excellent cloud production. The bottom airflow is adjustable and is 10 mm X 1.5 mm, and the top airflow slots are 3 mm X 2.5 mm. Inside of the device is four posts that hold 3 mm terminals, giving users plenty of space to modify the tank. The juice well is 11 mm deep, and it has an 810 wide bore drip tip. It does not have a 510 drip tip adapter.