The Obelisk AIO 60 is another one of those pod mod/box mod products that look like a box but is really a pod vape.
This product from the GeekVape store has a lot going for it and is well worth checking out for various reasons, notably battery capacity, flavor, and cloud production.
Table of Contents
What Is It Like to Vape This New Pod Mod?
First off, this pod mod is very responsive, and it hits immediately after pressing the firing button. They put a very good chip inside, and it has to be one of the fastest-hitting vapes out there.
Not only that, but the flavor is fantastic at high wattages. The best setting for this vape is 55 to 60 watts. The airflow is smooth, and the flavor saturates each drag.
Vapor Production
Vapor production with either coil is very high, and it rivals that of many box mods. This product is a great pod mod for people who want something that can produce huge amounts of vapor.
Power Modes
There are two power modes: variable wattage and temperature control. Additionally, the user can adjust the settings based on the coil’s material.
Safety Features
Several protection features are included in this device, such as overheating, overcharge, and low battery protection, and much more.
The GeekVape Obelisk Kit
The kit comes with:
- GeekVape Obelisk 60w AIO
- One Coil Tool
- Type-C USB Cable
- 0.4 ohm P Coil
- 0.5 ohm P Coil
Internal Building Quality and Design
There are no serious issues with the build and design quality. It would have been nice had the edges been a little more rounded, but it still travels comfortably and is ok to hold. It also has an excellent 510 drip tip.
The only problem is that the Obelisk pod moves around in the recess, causing a rattling sound. Also, the fill port should have been located at the top instead of on the side. There was more than enough room on top for it.
Battery
This vape carries a 2200mah battery, which is enough to get through the day, even on high wattages. Expect the battery to last a day or more. Also, the device comes with a type-c cable.
Screen
The screen is bright, vivid, and easy to read in bright light. From top to bottom, there is the battery indicator, wattage, and information like resistance and the puff counter.
Airflow
The airflow control is beneath the drip tip, and it rotates back and forth, allowing the user to change the settings from tight to open.
As earlier indicated, the airflow is top-notch, resulting in drags that are rich with flavor and vapor. It is also suitable for mouth-to-lung and direct-to-lung vaping.
The Obelisk 60 Pod Cartridge
The Obelisk AIO 60 pod is very well designed, except for the rattling and the fill port’s location. It holds 4 ml of liquid, and the fill port is covered by a silicone plug. The port is wide enough to accommodate nozzles of most sizes. Still, it is best to use a syringe or a long and thin nozzle to avoid messes.
Even though the Obelisk pod moves around inside the recess, do not expect it to fall off easily. It is connected to the vape with very strong magnets that provide for a solid connection.
How Long Do the Coils Last?
These Obelisk AIO coils can last a week or more if they are adequately primed and used with the correct juices. Priming coils requires dabbing the wicking with a little bit of juice, inserting them into a pod, filling the pod, and then letting them soak for five to ten minutes.
Doing this reduces the chances of there being burned or dry hits, both of which significantly reduce coil life and the flavor.
Compatible Juices
The coils for the Obelisk AIO 60 pod are for producing clouds, so it is best to get nicotine with a high vegetable glycerin content. Anything with 70/30 to 80/20 vegetable glycerin to propylene glycol will do fine.
How to Use the GeekVape Obelisk AIO 60w
This is not a hard device to use; anyone should be able to use it after reading the manual. One thing to be aware of is that the silicone tab covering the fill port can be difficult to unplug without long fingernails. Another option is to use blunt tweezers to unplug it.
Button Operation
- Click five times to turn on/off
- Press the up and down buttons to adjust the wattage
- Hold down the firing button and the left or right firing button to adjust the screen’s brightness
- Press the up and down buttons simultaneously to lock the wattage
- Click the firing button three times to switch power modes
How to Charge
The charging port is located on the left side and bottom of the vape, with the screen facing you. The USC-C cord is plugged into the charging port and left there until the vape is charged. The screen will indicate when it is finished charging.
How to Change the Coils
The Obelisk AIO 60 uses 0.4 (pre-installed) and 0.5 ohm P-coils. The former is rated for 50 to 60 watts, and the latter 40 to 50.
These are “plug-and-play” coils, which means they are pushed into and pulled out of the bottom of the Obelisk pod.
Competing Products
GeekVape Obelisk AIO 60 vs. iJoy Elite Mini 60W TC Kit
- The iJoy Elite Mini is a box mod, and the Obelisk AIO 60 is a pod mod, but they share similar characteristics, such as integrated 2200mah batteries and 60 watt output.
- The iJoy Elite Mini’s advantage is that it comes with a lower resistance 0.25 ohm coil, which means more clouds.
- However, it has 2 to 3 ml juice capacity, and it is slightly more expensive.
GeekVape Obelisk AIO 60 vs. VooPoo Drag S Pod Mod
- The Drag S is another one of those box mod-looking pod mods; it has a few more advantages than the Obelisk AIO.
- The Drag S has a more powerful 2,500 mah battery, lower resistance 0.2 and 0.3 ohm PnP coils, and a slightly larger 4.5 ml pod.
- The cherry on top is its intelligent atomizer recognition feature.
GeekVape Obelisk AIO 60 Specifications
Dimensions: | 97 x 47.5 x 24 mm |
Battery Type: | Integrated 2200mAh |
Wattage Output Range: | 5 to 60 Watts |
Resistance Range: | 0.1 to 3.0 ohm |
Temperature Range: | 200° to 600°F (100° to 315°C) |
Chassis Construction: | Zinc-Alloy |
Screen: | Color 0.96" TFT |
Pod Capacity: | 4 mL (Refillable) |
Geek Vape Press-Fit P Coils: | ✓ |
P Coil: | 0.4ohm (50 to 60 Watts) |
P Coil: | 0.5ohm (40 to 50 Watts) |
Magnetic Pod Connection: | ✓ |
Charging Type: | Type-C USB Port |
Colors: | Black, Gunmetal, Blue, and Green |
Pros&Cons
The Positives
- Outstanding flavor and vapor production
- High juice capacity
- Excellent battery life
- Reasonably priced
The Negatives
- The mod moves while inside the recess
- Odd placement of the filling port
Closing Thoughts About the Obelisk AIO Pod Mod
There is not much else to say about this vape, other than that it is all-around excellent. Flavor and cloud chasers will love the flavor-saturated clouds that are thick and puffy. It also has a powerful battery, great juice capacity, and an excellent set of coils.
The only problems are the placement of the fill port and the shaky Obelisk pod. Another problem that was not mentioned is that the panels are fingerprint magnets, but that in no way affects the vape’s performance.
Please leave a comment below if you have had a chance to use this vape and would like to share your thoughts on it.
Comments
Leave a comment