The New GeekVape Obelisk AIO 60: A Flavorful Vape for Cloud-Chasers

The Obelisk AIO 60 is another one of those pod mod/box mod products that look like a box but is really a pod vape.

This product from the GeekVape store has a lot going for it and is well worth checking out for various reasons, notably battery capacity, flavor, and cloud production.

Table of Contents

• Rating the Vaping Experience
• Opening the Starter Kit
• Build and Design Quality
• Battery Analysis and Performance
• Airflow
• Rating the Pod
• How to Use This Vape
• Alternative Starter Kits
• Final Thoughts

What Is It Like to Vape This New Pod Mod?

First off, this pod mod is very responsive, and it hits immediately after pressing the firing button. They put a very good chip inside, and it has to be one of the fastest-hitting vapes out there.

Not only that, but the flavor is fantastic at high wattages. The best setting for this vape is 55 to 60 watts. The airflow is smooth, and the flavor saturates each drag.

Vapor Production

Vapor production with either coil is very high, and it rivals that of many box mods. This product is a great pod mod for people who want something that can produce huge amounts of vapor.

Power Modes

There are two power modes: variable wattage and temperature control. Additionally, the user can adjust the settings based on the coil’s material.

Safety Features

Several protection features are included in this device, such as overheating, overcharge, and low battery protection, and much more.

The GeekVape Obelisk Kit

The kit comes with:

Internal Building Quality and Design

There are no serious issues with the build and design quality. It would have been nice had the edges been a little more rounded, but it still travels comfortably and is ok to hold. It also has an excellent 510 drip tip.

The only problem is that the Obelisk pod moves around in the recess, causing a rattling sound. Also, the fill port should have been located at the top instead of on the side. There was more than enough room on top for it.

Battery

This vape carries a 2200mah battery, which is enough to get through the day, even on high wattages. Expect the battery to last a day or more. Also, the device comes with a type-c cable.

Screen

The screen is bright, vivid, and easy to read in bright light. From top to bottom, there is the battery indicator, wattage, and information like resistance and the puff counter.

Airflow

The airflow control is beneath the drip tip, and it rotates back and forth, allowing the user to change the settings from tight to open.

As earlier indicated, the airflow is top-notch, resulting in drags that are rich with flavor and vapor. It is also suitable for mouth-to-lung and direct-to-lung vaping.

The Obelisk 60 Pod Cartridge

The Obelisk AIO 60 pod is very well designed, except for the rattling and the fill port’s location. It holds 4 ml of liquid, and the fill port is covered by a silicone plug. The port is wide enough to accommodate nozzles of most sizes. Still, it is best to use a syringe or a long and thin nozzle to avoid messes.

Even though the Obelisk pod moves around inside the recess, do not expect it to fall off easily. It is connected to the vape with very strong magnets that provide for a solid connection.

How Long Do the Coils Last?

These Obelisk AIO coils can last a week or more if they are adequately primed and used with the correct juices. Priming coils requires dabbing the wicking with a little bit of juice, inserting them into a pod, filling the pod, and then letting them soak for five to ten minutes.

Doing this reduces the chances of there being burned or dry hits, both of which significantly reduce coil life and the flavor.

Compatible Juices

The coils for the Obelisk AIO 60 pod are for producing clouds, so it is best to get nicotine with a high vegetable glycerin content. Anything with 70/30 to 80/20 vegetable glycerin to propylene glycol will do fine.

How to Use the GeekVape Obelisk AIO 60w

This is not a hard device to use; anyone should be able to use it after reading the manual. One thing to be aware of is that the silicone tab covering the fill port can be difficult to unplug without long fingernails. Another option is to use blunt tweezers to unplug it.

Button Operation

How to Charge

The charging port is located on the left side and bottom of the vape, with the screen facing you. The USC-C cord is plugged into the charging port and left there until the vape is charged. The screen will indicate when it is finished charging.

How to Change the Coils

The Obelisk AIO 60 uses 0.4 (pre-installed) and 0.5 ohm P-coils. The former is rated for 50 to 60 watts, and the latter 40 to 50.

These are “plug-and-play” coils, which means they are pushed into and pulled out of the bottom of the Obelisk pod.

Competing Products

GeekVape Obelisk AIO 60 vs. iJoy Elite Mini 60W TC Kit

GeekVape Obelisk AIO 60 vs. VooPoo Drag S Pod Mod

Pros&Cons

Closing Thoughts About the Obelisk AIO Pod Mod

There is not much else to say about this vape, other than that it is all-around excellent. Flavor and cloud chasers will love the flavor-saturated clouds that are thick and puffy. It also has a powerful battery, great juice capacity, and an excellent set of coils.

The only problems are the placement of the fill port and the shaky Obelisk pod. Another problem that was not mentioned is that the panels are fingerprint magnets, but that in no way affects the vape’s performance.

Please leave a comment below if you have had a chance to use this vape and would like to share your thoughts on it.