What to do When the Atomizer is Low? How to Fix and Prevent

atomizers-low-image
Shutterstock / AlexLMX

It can be very frustrating when a mod starts flashing atomizer low error messages when vaping. These problems are bound to happen eventually, so do not get too frustrated.

Look on the bright side; these warnings are for preventing accidents with your vape. Still, it is quite aggravating when it does happen, especially if the vaper does not know how to fix the issue preventing him or her from vaping.

Rather than taking it to a vape shop, though, the user can learn how to fix his or her device or tank. Here are several common problems that cause these messages to appear, as well as advice on how to fix them.

Table of Contents

  1. No Atomizer Found
  2. Atomizer Short
  3. Atomizer Low
  4. Reasons for Warning
  5. How To Prevent Atomizer Issues

  1. No Atomizer Found
  2. Atomizer Short
  3. Atomizer Low
  4. Reasons for Warning
  5. How To Prevent Atomizer Issues

No Atomizer Found

means the vape cannot use the atomizer because the coil has not been properly screwed in. Other problems could be the 510 connection or a defective coil.

means the vape cannot use the atomizer because the coil has not been properly screwed in. Other problems could be the 510 connection or a defective coil.

Atomizer Short Warning

means that the coil is causing the mod to short-circuit, which means that there is an excessive current flowing along an unintended path.

means that the coil is causing the mod to short-circuit, which means that there is an excessive current flowing along an unintended path.

Atomizer Low Warning

means that the coil resistance is too low.

Vapers who see any of these messages on their mod should stop using the vape immediately. But do not worry. These issues can be solved quickly so that the user can get back to vaping as soon as possible.

means that the coil resistance is too low.

Vapers who see any of these messages on their mod should stop using the vape immediately. But do not worry. These issues can be solved quickly so that the user can get back to vaping as soon as possible.

Reasons for Atomizer Low Message and How to Fix

Short in the Coils

A common reason why the atomizer low warning occurs during vaping is that the coil was not properly made, the connection is loose, it is not seated correctly, or it does not have an insulator.

Another reason a user might get this warning is that he or she misjudged the size of the build. This can cause the coil to come in contact with the chamber, which in turn causes the aforementioned atomizer warnings.

How to fix

To fix this issue, make sure the coil is seated correctly. Try another coil if this does not work. If doing this resolves the problem, it means a bad coil was in the mod. When using rebuildables, make sure all of the connections are secure. Screws tend to loosen over time, so make sure they are in tight. Another thing to do is to make sure there is enough space between the top cap and coil. If the coil touches anything other than the posts, it will result in a short.

Damaged Insulator

Most atomizers use PEEK insulators to keep the positive and negative charges separate. A damaged insulator can result in a short out.

If this is the case, inspect the insulator, which is located in the 510 pin. Look for signs of damage. If the insulator is not damaged, the warning is not being caused by a damaged insulator.

Low Resistance

Another thing to do is to check the resistance of the coil if everything else is fine. If the resistance of the coil is lower than what the device can tolerate, the vape will not fire.

Dry burning is one way to get around this problem because it can raise the coil’s resistance. Another thing to do is add wraps to the coil, which will increase the resistance high enough so that the mod fires. If using a factory coil, either a new coil or vape is needed.

Damaged Vaporizer

Atomizer low messages sometimes occur when vaping because the mod is broken. This occasionally happens, no matter how careful the user is. These issues are caused by leaking juice, overtightening the atomizers, and by dropping it.

The only remedy to these issues is to take good care of the vape. If the juice is leaking onto the mod during vaping, or if it has been dropped one too many times, it might be time to consider getting a replacement. People who work in extreme environments or who are highly active should get a vape that is IP67 certified. Mods like these are water, dust, and shockproof, and they can handle more than other mods.

Chipset Failure

Chipsets eventually fail, even if the mod is not otherwise damaged. This is often the case if the user has done everything humanly possible to repair the device. Get a warranty when purchasing a mod. When the chipset fails, there is nothing to do except replace the device or chip.

Short in the Coils

A common reason why the atomizer low warning occurs during vaping is that the coil was not properly made, the connection is loose, it is not seated correctly, or it does not have an insulator.

Another reason a user might get this warning is that he or she misjudged the size of the build. This can cause the coil to come in contact with the chamber, which in turn causes the aforementioned atomizer warnings.

How to fix

To fix this issue, make sure the coil is seated correctly. Try another coil if this does not work. If doing this resolves the problem, it means a bad coil was in the mod. When using rebuildables, make sure all of the connections are secure. Screws tend to loosen over time, so make sure they are in tight. Another thing to do is to make sure there is enough space between the top cap and coil. If the coil touches anything other than the posts, it will result in a short.

Damaged Insulator

Most atomizers use PEEK insulators to keep the positive and negative charges separate. A damaged insulator can result in a short out.

If this is the case, inspect the insulator, which is located in the 510 pin. Look for signs of damage. If the insulator is not damaged, the warning is not being caused by a damaged insulator.

Low Resistance

Another thing to do is to check the resistance of the coil if everything else is fine. If the resistance of the coil is lower than what the device can tolerate, the vape will not fire.

Dry burning is one way to get around this problem because it can raise the coil’s resistance. Another thing to do is add wraps to the coil, which will increase the resistance high enough so that the mod fires. If using a factory coil, either a new coil or vape is needed.

Damaged Vaporizer

Atomizer low messages sometimes occur when vaping because the mod is broken. This occasionally happens, no matter how careful the user is. These issues are caused by leaking juice, overtightening the atomizers, and by dropping it.

The only remedy to these issues is to take good care of the vape. If the juice is leaking onto the mod during vaping, or if it has been dropped one too many times, it might be time to consider getting a replacement. People who work in extreme environments or who are highly active should get a vape that is IP67 certified. Mods like these are water, dust, and shockproof, and they can handle more than other mods.

Chipset Failure

Chipsets eventually fail, even if the mod is not otherwise damaged. This is often the case if the user has done everything humanly possible to repair the device. Get a warranty when purchasing a mod. When the chipset fails, there is nothing to do except replace the device or chip.

How to Fix Atomizer Short Warnings

Micro-coil-clearomizer-image
Shutterstock / Hurricanehank

Here are a few things to try to resolve this issue:

  • Make sure the batteries are charging them properly by putting them in a separate charger
  • If using an RDA/RTA, check and see if the coil is touching the cap or deck.
  • See if there are any breaks in the coil
  • Ensure that the coil is fully screwed into the tank
  • Use different coils from the pack to see if it is only that one coil
  • Use a different mod

If error messages continue to pop up, use a different atomizer on the mod. If it still reads “atomizer short,” the problem is with the vape, not the atomizer or coil. Contact the manufacturer and ask if they can replace it.

Micro-coil-clearomizer-image
Shutterstock / Hurricanehank

Here are a few things to try to resolve this issue:

  • Make sure the batteries are charging them properly by putting them in a separate charger
  • If using an RDA/RTA, check and see if the coil is touching the cap or deck.
  • See if there are any breaks in the coil
  • Ensure that the coil is fully screwed into the tank
  • Use different coils from the pack to see if it is only that one coil
  • Use a different mod

If error messages continue to pop up, use a different atomizer on the mod. If it still reads “atomizer short,” the problem is with the vape, not the atomizer or coil. Contact the manufacturer and ask if they can replace it.

How to Fix Atomizer Low Warnings

Take the following steps to fix an “atomizer low” warning:

  • Take the atomizer off of the vape
  • If using a tank, open it and look at the coil. Ensure that the coil is properly secured to the bottom of the tank
  • If the vape is an RDA, check and see if the positive and negative posts are screwed in. Sometimes a coil that has not been put into the mod properly can trigger this error message.
  • Take the tank off and reconnect it. If the message keeps coming up, replace the mod or find an atomizer that will work with the mod

There are two things to do to help resolve this problem. The first thing to do is to change tanks or RDAs and find one that has the proper resistance. The other option is to completely rebuild the coil so that it is compatible with the mod’s resistance tolerance. Those who choose the second option will have to buy new coils that have the same resistance as the mod. If the coil’s resistance is suitable for the mod, the problem is that the coil is not screwed in enough, it is defective, or the 510 connection is bad.

Take the following steps to fix an “atomizer low” warning:

  • Take the atomizer off of the vape
  • If using a tank, open it and look at the coil. Ensure that the coil is properly secured to the bottom of the tank
  • If the vape is an RDA, check and see if the positive and negative posts are screwed in. Sometimes a coil that has not been put into the mod properly can trigger this error message.
  • Take the tank off and reconnect it. If the message keeps coming up, replace the mod or find an atomizer that will work with the mod

There are two things to do to help resolve this problem. The first thing to do is to change tanks or RDAs and find one that has the proper resistance. The other option is to completely rebuild the coil so that it is compatible with the mod’s resistance tolerance. Those who choose the second option will have to buy new coils that have the same resistance as the mod. If the coil’s resistance is suitable for the mod, the problem is that the coil is not screwed in enough, it is defective, or the 510 connection is bad.

How to Fix No Atomizer Found Warnings

Here is a checklist of things to do:

  • Take the atomizer off of the mod
  • Tighten the coil all the way. It could be that the coil is loose
  • Check the 510 connection, and thoroughly clean the threading of the mod and atomizer with a q-tip
  • Make sure the 510 connection makes contact with the mod

Clean the tank using a q-tip or paper towel, making sure there is no grime around the 510 connection. Dried e-liquid, dirt, and other things can cause this warning to pop up. Another thing to do is to make sure the center pin is close enough to connect with the tank. Put everything back together once the tank and 510 connection are clean.

Here is a checklist of things to do:

  • Take the atomizer off of the mod
  • Tighten the coil all the way. It could be that the coil is loose
  • Check the 510 connection, and thoroughly clean the threading of the mod and atomizer with a q-tip
  • Make sure the 510 connection makes contact with the mod

Clean the tank using a q-tip or paper towel, making sure there is no grime around the 510 connection. Dried e-liquid, dirt, and other things can cause this warning to pop up. Another thing to do is to make sure the center pin is close enough to connect with the tank. Put everything back together once the tank and 510 connection are clean.

How to Avoid Atomizer Low Issues

Which is the Best Atomizer with No Issues?

Every vape has the potential to malfunction. Man has yet to devise the perfect gadget. But, some mods are less prone to failures than others. People who are new to vaping and are worried about their mods failing should get a sub-ohm tank. These are best for novice vapers. They are easy to use and operate since they use pre-built coils that work in various resistances. These mods rarely short-circuit.

What is the Best Vape for Having No Problems at All?

Every vape has the potential to cause a problem. There is no way to get around this. However, there are things the user can do to lessen the chances of an error warning popping up. One, when assembling an RDA or any other vape, follow all specified directions. Secondly, make sure the vape is cleaned regularly. Finally, handle the mod with care. Do not drop it or leave it lying out in the sun or a hot room or car. Doing these simple things will significantly reduce the chances of getting one of these warnings.

Which is the Best Atomizer with No Issues?

Every vape has the potential to malfunction. Man has yet to devise the perfect gadget. But, some mods are less prone to failures than others. People who are new to vaping and are worried about their mods failing should get a sub-ohm tank. These are best for novice vapers. They are easy to use and operate since they use pre-built coils that work in various resistances. These mods rarely short-circuit.

What is the Best Vape for Having No Problems at All?

Every vape has the potential to cause a problem. There is no way to get around this. However, there are things the user can do to lessen the chances of an error warning popping up. One, when assembling an RDA or any other vape, follow all specified directions. Secondly, make sure the vape is cleaned regularly. Finally, handle the mod with care. Do not drop it or leave it lying out in the sun or a hot room or car. Doing these simple things will significantly reduce the chances of getting one of these warnings.

Final Thoughts about Atomizer Low Error Warnings

Atomizer low messages are not pleasant to get, but with the proper amount of smarts and elbow grease, these issues can be fixed. Most of these issues can be avoided by paying attention to detail and handling the vape responsibly. Be careful when assembling the vape, clean it often, and do not drop it or otherwise mishandle it. If you have experience with atomizer low messages, please share your tips and advice on what to do. The input of our readers and their help is much appreciated.

Atomizer low messages are not pleasant to get, but with the proper amount of smarts and elbow grease, these issues can be fixed. Most of these issues can be avoided by paying attention to detail and handling the vape responsibly. Be careful when assembling the vape, clean it often, and do not drop it or otherwise mishandle it. If you have experience with atomizer low messages, please share your tips and advice on what to do. The input of our readers and their help is much appreciated.

Published: February 23, 2020 Updated: March 19, 2020


avatar
1st Place 8.5/10

Best Choice


Comments

Leave a comment