The Voltrove Boron RBA is a clear-plastic rebuildable tank. It can work with billet box mods and has a 510-threaded platform to attach to other mods. The device features a transparent shell that houses the main build deck. The build deck is postless and can support single-and-double coil configurations. It has up to 5ml of e-juice capacity. The device has a side-fill port topped with a rubber stopper and an all-stainless steel construction around the edges of the atomizer.
Table of Contents
A Closer Look at the Voltrove Boro
The Voltrove Boro features outer stainless steel construction with a transparent shell around the chimney section and the build deck. The atomizer features a bottom bridge build platform that slides out of the plastic shell so you can access the interior build deck. A bottom panel hides the small threaded pin for use with a billet box mod.
But this pin can be removed, and you can screw the 510-threaded ring that lets you attach the tank to a 510-threaded mod. The bottom bridge is also the airflow control airway where the air comes in through the two sides vents. The build deck features a postless design with two lead terminals on the platform.
Leads can be secured with the two side screws located on the platform’s side. The internal chimney is integrated into the plastic shell and cannot be removed. It measures almost 4mm in height, but the kit includes a couple of chimney reducers that can bring down the ridge to either 2mm or 3mm.
What’s in the Kit?
This RBA has the typical gear and accessories included in the kit that can change many of its functions and helps you build your coils.
- 1 x Voltrove Boro RBA
- 1 x 510-adapter
- 1 x 3mm chimney reducer
- 1 x 2mm chimney reducer
- 1 x bag of accessories
The Look and Feel of the Boro
The entire atomizer has a well-made exterior that combines high-quality materials with expert precision. The ridges are all stainless steel, and the device features an all-stainless steel color and a smokey black version. The outer rim also features CNC engraving on the sides and the chimney.
The entire plastic section features a sturdy PCTG, a custom-designed shell that acts as the tank section. The plastic also features a fill-port that uses a tab to cover the port and allows users to fill up the tank with a narrow bottle nozzle. The bottom section features the two non-adjustable airflow vents, but the included pin can be removed and replaced with the 510 adapters in the kit.
Building and Mounting Coils
The build deck of the Voltrove features two-lead terminals with a large airflow vent in the center of the deck. The deck uses side-screws to attach and secure any leads to the deck floor and place them right above the airflow entry hole. On either side of the deck are two large juice wells that are ample for large amounts of cotton wicks.
The chimney attaches to the top of the deck and features a few engravings on the side. The large build deck can accommodate only single coil builds, but it has other options for use as a squonk device and a regular 510-threaded tank. With the chimney attached, and the tank installed, users can screw in their preferred drip tip to the top of the tank.
The Competition
Kanger Subtank Mini
The Kanger Subtank Mini is a sub-ohm tank that features an all-stainless steel build with glass panels containing 4.5ml e-juice capacity. The Subtank Mini uses newly-designed coils wrapped with organic Japanese cotton and is rated at 0.5ohms. The Subtank can also vape on an included RBA deck that users can install on the device to change its capacity. The tank is elongated and thin and has a 22mm diameter to fit on most slim, single, or dual-18650 mods.
V12 RBA-T Rebuildable Head
The SMOKTech V12 RBA-T rebuildable head can be installed into several tank types from the famed TFV line of SMOK atomizers. The RBA deck is all stainless steel, and in the shape of a T, so it can support almost any coil configuration from single, dual, triple, or even 12-coil designs. In addition, the build deck has ample room to keep several wire types, from titanium to coiled Clapton coils.
Voltrove Boro RBA Specifications
Construction: | 304 Stainless Steel |
PCTG Custom Boro: | Yes |
Postless Deck: | Yes |
Unique airflow design : | ✓ |
Chimney: | 2 mm/ 3 mm/ 4 mm |
Colors: | Stainless Steel, Black |
Pros&Cons
The Positives
- Large juice wells
- Great vapor production
- High-performance tank
- Easy-to-use build deck
- Good airflow
The Negatives
- Build deck is proprietary
Conclusion: Voltrove Boro RBA Review: A Unique Design for Plenty of Clouds
Have you used a similar billet-box RBA before? Do you prefer them to squonks, or do you prefer sub-ohm tanks? Let us know in the comments section below.
The Voltrove Boro RBA is a uniquely designed rebuildable with a multi-functional design and can be used in many different ways. The internal build deck has an effortless design that makes mounting any coil build easy. The airflow is non-adjustable, but the wide-berth of either vent gets a lot of air into the build deck. The machining and build of the entire tank are seamless and feature clean, sharp threading, and durable outer construction.
Jacques
December 15, 2022 at 6:27 amCeci n’est une critique du Voltrove boro rba, qui me semble un bon rba, bien conçu et simplement réalisé,
Nous prend-on pour des imbécile de vendre ces rba 100$ et plus parfois 200$, voire 300$ ? Quand on voit des tanks plastique (type boro) à 50$ alors que sorti d’usine cela vaut tout au plus entre 2 et 5$. C’est insensé. À bon entendeur