Some starter kits look brittle, and that is because they are. However, many vapers need a box mod that is more durable and dependable than average, and that vape is the Wotofo MDura Pro starter kit.
Its IP67 rating is perfect for vapers who live active lifestyles and need a vape that can handle exposure to the elements.
Table of Contents
Wotofo MDura Review
The MDura Pro from Wotofo is an outstanding starter kit that puts out 230 watts. It has an extensive suite of power modes, and it has an excellent build quality that makes it almost impervious to wear and tear.
Additionally, it is paired with a well-designed tank with a pair of ultra low-resistance coils that produce quality flavor and vapor.
This box mod produces a lot of vapor because of the low resistance coil and the airflow. Expect to blow large amounts of clouds with every drag. A few vape sessions with this starter kit will fill an entire room with vapor.
The MDura Pro is loaded with vaping modes, including temperature, standard, power, power plus, and memory mode.
In addition, they have modes for titanian, nickel, and stainless steel coils.
- 10 Second Overtime Protection
- Short Circuit Protection
- Overcharge Protection
- Over-Discharge Protection
- Reverse Polarity Protection
Wotofo MDura Pro 230W vs. Wotofo MDura Mod
The main difference between these box mods is that the MDura Pro goes up to 230 watts, while the MDura goes to 200.
Overall, the MDura Pro is a better vape because it has higher wattage output and power modes. The MDura does not have any power modes.
The MDura has a few advantages, namely the placement of the screen and the adjustment buttons. The MDura Pro’s screen is too big, taking up an entire side of the vape. It is so big that it encompasses the adjustment buttons. The MDura’s buttons are not built into the screen, resulting in less smudging.
Inside the Wotofo Mdura Pro Kit
- Wotofo MDura Pro Box Mod
- nexMESH Pro Tank
- 0.2 ohm H12 Clapton Coil
- 0.15 ohm H15 Single Mesh & Parallel Coil
- Bubble Glass Tube
- Type-C Charging Cable
- Accessory Bag
- User Manual
Internal Building Quality and Design
The build quality of this box mod is impressive. It is dust, shock, and waterproof, making it ideal for people who work or play in rough conditions.
The exterior has a comfortable imitation leather grip and a spring-loaded battery door that comes open with little effort.
The only criticisms of the design are that the adjustment buttons are too close together, and they are built into the screen.
The screen is 1.2 inches and covers almost one side of the vape. It displays the life of both batteries and all the information needed to vape.
And it does it so in very vibrant colors that can be changed by clicking the up and firing button simultaneously. It scrolls in one-watt increments and round robins.
However, it smudges easily and is oversized by half.
Wotofo nexMESH Pro Sub-Ohm Tank
The nexMesh is a 24 mm diameter tank with a high 4.5 ml juice capacity and 6 ml if the bubbly tank is used. It comes with two coils: 0.2 ohm H12 Clapton mesh coils and 0.15 ohm H15 dual mesh and parallel coils that push into the bottom. At the top is an 810 style drip tip and the fill port.
The best thing about this tank is that it is top-filled, making it convenient and easy to refill. In addition, the flavor is excellent if the coils are vaped at the recommended wattages.
The airflow control ring is located at the bottom, and it rotates very nicely. Airflow is best about halfway open so that there is some restriction to the drag. However, that is just a personal preference.
Some might think that it is too loud when inhaling, but one should expect nothing else. It is a direct-to-lung tank, so it is going to make some noise. The only real problem is that the top o-ring tension is a little too high.
This tank is the main reason why this starter kit is fun to use. The H15 has two coils inside, a single coil and mesh coil, and it produces excellent flavor no matter the juice in the tank.
The manufacturer says it is best vaped between 65 and 80 watts, but the best settings from our point of view are 75 to 80 watts. Here the vapor is warmer, and the flavor is still at a high level.
Do not forget the H12 Clapton coil. The best settings for this were 60 to 75 watts (the manufacturer’s recommendation is 55 to 75 watts). The vapor is slightly cooler, but it is still flavorful and produces as much vapor as the H15 coil. This coil is for people who like a slightly cooler vape.
Remember, the wattage recommendations are just recommendations. Users should experiment with their full wattage ranges and find the best setting for themselves.
These sub-ohm coils are designed to produce clouds, so getting nicotine juice with a high vegetable glycerin content is essential. An 80 to 20 vegetable glycerin to propylene glycol ratio will do, but 70/30 will be fine, too.
How Long Do the Coils Last?
The coils should last more than enough time if used with high VG liquids and not 50/50 high nicotine liquids. The 50/50 liquids can gunk up the coils and kill them quickly. Vaping with the proper liquids guarantees a week or more of vaping time.
How to Use the Wotofo Mdura Pro Kit
This starter kit is excellent for advanced and novice vapers alike because it is so easy to use. To get started:
- Unscrew the base and pop out the coil.
- Drop some liquid into the coil and give it a minute to soak in.
- Push the coil back in and flip open the top cap to reveal the fill port.
The fill port has a membrane to prevent the juice from leaking out. Push the nozzle through the membrane and fill the tank to capacity. Let it sit for five to ten minutes so that the juice has plenty of time to soak into the coils.
Replace the glass by unscrewing the recess for the coil. The glass then comes out and can be replaced with the bubble glass.
To get started vaping, use the following button combinations.
- Click the firing button five times to turn it on or off
- Click the adjustment button furthest to the left to activate stealth mode
- Click the firing button three times to lock the box mod
- Press both adjustment buttons to lock the wattage
- Press the up and firing button to change colors
- Press the down and firing button to clear the puff counter
Wotofo MDura Pro vs. GeekVape Aegis Legend
The GeekVape Aegis Legend is also an excellent box mod that is worth considering. One of its advantages is that it has a bypass mode, which the MDura Pro does not have.
Its one disadvantage is its tanks small 4 ml tank. The Legend is a 200 watt box mod, and 4 ml is not adequate juice capacity.
Wotofo MDura Pro vs. Wismec Luxotic
Besides having different wattage outputs and power modes, the chief difference between these vapes is battery compatibility. The Wismec Luxotic is compatible with 18650 and 20700 batteries, which gives it an edge when it comes to vaping time. The MDura Pro is compatible with 18650s only.
Wotofo MDura Pro Specifications
|Dimensions:||88.1 x 47.4 x 33.1 mm|
|Batteries Type:||Dual 18650s|
|Wattage Output:||5 to 230 Watts|
|Temperature Range:||200° to 600°F/100° to 315°C|
|Resistance Range:||0.1 to 2.5 ohm|
|Wire Compatibility:||Nickel, Titanium, and Stainless Steel|
|Power Modes:||Temperature, Standard, Power, Power Plus, and Memory Mode|
|Screen:||1.2 Inch TFT|
|Charging Type:||USB Port: Type-C|
|Colors:||Black, Red, Blue, Orange, and Retro Red|
|Juice Capacity:||4.5 to 6 ml (Bubble Glass)|
|Construction:||304 Stainless Steel|
|Fill System:||Single Port With Sliding Top Cap|
|Drip Tip:||Delrin 810|
|Colors:||Black, Gunmetal, Stainless Steel, Blue, Gold, and Rainbow|
|OFRF NexMesh Pro Coil Series:||✓|
|Clapton Mesh Coil:||0.2 ohm H12|
|Dual Mesh and Parallel Coil:||0.15ohm H15|
- Resistant to water, shock, and dust
- High juice capacity
- Excellent flavor and cloud production
- Reasonable price
- Great airflow
- Adjustment buttons to close together
- Oversized screen
Final Thoughts About the Wotofo Mdura Box Mod
There are no significant cons with this box mod, only a few subjective criticisms. The main one is that the screen is too big and encompasses the firing buttons resulting in smudging.
Also, the top o-ring on the tank is too tight, and it would have been better for battery life if the vape was compatible with 20700/21700 batteries.
Other than that, this starter kit gets top marks. It has outstanding airflow and two coils that give off excellent flavor. It also has an incredibly high build quality that makes it near-impervious to a variety of mishaps.
This vape is perfect for people working in the construction and teamster industries and for hikers, bikers, and other hobbyists.
If you have any thoughts you would like to share about this vape, feel free to do so in our comments section.