The Mesh Coil Tank: What to Look For?

Uwell Crown 4 Tank has all of the standard features that make a tank worth buying and more. The vape comes with a 5 ml glass case, but with the extension glass, the e-juice capacity increases to 6 ml. The tank of Uwell is easy to refill thanks to its top-fill system. Self-cleaning technology is the best feature of Uwell. Rather than leaking out and causing a mess, excess juice is absorbed by the condensation holder where it is then vaporized.

The base of this mesh coil tank contains three wide slots for airflow, which allow for restricted or airy drags. Users not only get the pre-installed 0.4-ohm coil, but they also get an extra 0.2-ohm coil.

The Firefluke Mesh uses mesh coils that have a large surface area, superior flavor, and a longer lifespan. The kit comes with two 0.15-ohm Firefluke Mesh Coils that can be vaped at 40 to 90 watts. The coils can be screwed on or screwed out. This mesh coil tank can hold 3 ml of e-juice, and it has adjustable bottom airflow.

Refilling the Firefluke Mesh is effortless because it is top-filled. The top is threaded, and to top the tank off, unscrew it and put the e-liquid in through the slots. This mesh coil tank is leak-free thanks in part to its threaded top. It is available in steel, carbon fiber, and resin, and they are available in a lot of different colors

The Geekvape Alpha is a mesh coil tank made of steel and resin that uses Meshmellow coil heads. The kit comes with 0.15-ohm coil and 0.4-ohm coil. The tank measures 25 mm in diameter, so it goes well with most mods, and it holds 4 ml of e-juice. The unit is filled from the top, and the coil system uses organic Egyptian cotton. To top flips open and inside, there is a rubber coating that helps to prevent leakage.

The Geekvape Alpha can run at high wattages thanks to its dual-bottom airflow that keeps the atomizer at an optimal temperature. The airflow can be quite tight when it is first used, but after a little while, it gets looser. It just needs a few moments to be broken in. Included in the kit is a Geekvape spare glass tube in case something happens with the other one.

The Freemax Pro can hold 6 ml of e-juice, and it is topped off through the sliding top-fill system. The tank is 25 mm in diameter, so it is compatible with many of the most popular mods on the market. The juice is heated with the help of 0.15-ohm single coil (40 to 70 watts, and 0.2ohm dual coils (60 to 90 watts). The advantage of using these coils is that they have a larger surface area than usual, which results in even heating, more efficient absorption, and superior flavor. Plus, they last a long time, and they can be screwed on and off.

The airflow control ring is located at the bottom of the tank, and the air comes in through two large airflow slots. The result is outstanding flavor and incredible cloud production.

The Smok TFV12 Prince is a sub-ohm mesh coil tank that can hold 5 ml of e-juice. With the convex glass extension included in the kit, it can hold 8 ml of liquid. The sub-ohm tank itself is made out of stainless steel, and the tube is constructed from reinforced glass, making the entire system dependable and durable.

The TFV12 Prince works with several coils: the 0.12-ohm V12 Prince T10 (60 to 120 watts), 0.15-ohm V12 Prince-X6 Sextuple Coils (50 to 120 watts), and 0.4 ohm V12 Prince-Q4 Quadruple Coils (40 to 100 watts). They make this sub-ohm tank great for high powered vaping. Another thing to like about this unit is its top-fill rotary design with a locking mechanism and an 810 Cobra drip tip. The Smok tank is available in over a dozen colors, including navy blue, pink, and purple.

The Horizon Falcon is a high capacity mesh coil tank that can hold a lot of e-juice. At standard capacity, it can hold 5 ml of liquid, and with the extension glass, it contains 7 ml. It can work with four different coils. Choose between F1, F2, and F3 Falcon Coils that are rated for 70 and 80 watts. They use wicking that contains cotton, natural flax fiber, and wood pulp.

It also works with 0.15-ohm M1 Mesh Falcon Coil that uses wood pulp and cotton rated for 70 watts. The mesh coil can work for three weeks before it has to be replaced. These coils help to produce amazing clouds and delicious flavor. The airflow control ring is smooth, and the top-fill cap is easy to turn, making for easy access.

The Fat Baby is a 25 mm diameter mesh coil tank with 4.7 ml of standard capacity and 6 ml with the extension glass. The fill port has a sliding door that is pushed open, but it does not have a locking mechanism. This mesh coil tank uses an M15 coil head with a 0.15-ohm mesh coil that is rated for 50 to 80 watts. There is an extra coil in the kit, plus spare o-rings.

The coils are extracted by twisting them out. The inside of the well holds plenty of wicking and the juice slots are big. The tank has four adjustable airflow slots measuring 4 mm X 2 mm, and it utilizes a honeycomb style drip tip. The coils produce great flavors, and it is an excellent tank for flavor chasers.

The Vandy Vape RDA mesh coil tank not only uses mesh coils, but it also uses single and dual coils, making it highly versatile. It has a postless deck with two terminals that allow users to mount coils and secure them using side screws. This tank can hold 1 ml of e-juice, and it has a large wick size, which allows for more liquid to be absorbed. None of the e-juice is wasted, which makes this juice well highly efficient despite its small capacity.

This unit is made out of stainless steel, making it very durable. Another good thing about this mesh coil tank is that it has a gold-plated 510 connection and a bottom feed pin. Included in the kit are a ULEM and Delrin mouthpiece, as well as a 510 adapter

The Aero from GeekVape is a sub-ohm atomizer that has a lot of features that make it worth looking at. The main thing it has going for it is that it holds 4 ml of e-juice. The capacity can be increased to 5 ml thanks to the bulb glass, which is included in the kit. It also has dual adjustable airflow slots, and it is constructed from high-quality stainless steel.

Another thing to like about it is that it works well with super mesh 0.2-ohm and IM4 0.15-ohm coils. Refilling the mesh coil tank is easy thanks to its top-fill system with a top cap that can be twisted off. Once the cap is off, the user can refill the vape through two filling slots.

The Vandy Vape Mesh is a 24 mm RTA mesh coil tank that has a standard 2 ml capacity. The e-juice capacity can be increased with a 4 ml step-shaped extension glass. Pyrex glass is used to make a stronger tank, and the rest of the unit is made out of stainless steel. The tank is rebuildable thanks to its elongated two-post design and clamp post mechanism.

Everything on the build-deck locks down tightly thanks to the fact that there are two screws per post. The deck gives the user the option to modify the tank as he or she sees fit. Airflow comes in through the top, and refilling the vape is easy thanks to its top-fill design. The kit comes with three drip tips: 18 mm resin, 18.5 Delrin Doc, and the 17.5 mm ULTEM. This mesh coil tank has a 510 connection and a gold-plated contact for better connectivity.